Bamboo wood fiber wall panels rely on zero formaldehyde, and the slogan of environmental protection has become popular in recent years. As the saying goes, there are many people, and the goods are the same. There are many boards on the market, but they are good and bad. Good board is indeed environmentally friendly , but under the premise of selling high profits, some people have crooked thoughts, recycling waste pressed boards, inferior glue sticker film, the formaldehyde content of this inferior board is more than ten times higher than the national standard or even higher, if you buy back , the consequences are unimaginable, especially in families with children at home, the harm is even greater.
So how do we distinguish the quality of bamboo fiberboard?Here are some suggestions.
The first trick is simple and rough to look at the price, as the saying goes, good cheap is not good goods, good goods are not cheap. All plates with a unit price of less than 70 yuan per square meter should not be considered .Because the cost is more than so much .
The second trick is to look at the lamination process .What is this lamination process? To put it bluntly, it is how this film is applied .There are two ways to apply the film .One is called cold adhesive lamination,and the other one is called hot melt adhesive lamination .The price of hot melt adhesive laminating equipment is about 11-150,000 yuan, while the price of cold glue process laminating equipment is about 3-40,000 yuan.You can calculate this cost And their environmental protection and quality difference is very large. So as long as it is a hot melt adhesive coated board, everything else will not be too bad, as long as this point is well controlled, there is no problem, so how to judge whether this board is hot melt adhesive coated First of all, you can ask customer service first, if the customer service says that it is a hot melt adhesive coated board, ask them to send a sample over, get the sample and break it from the middle. If the film can be torn off whole, and the board under the film is uniform and smooth, there is no peculiar smell, it means that he is hot melt adhesive laminated, cold glue is corrosive lamination, the first is that it is not easy to tear It is easy to tear off piece by piece Second, tearing off the board is easy to be pitted and not smooth As for the appearance of the board, it depends on your own personal preferences to choose.
The price of 70 yuan per square meter mentioned above has been the hollow wall panel removed, the hollow suitable for tooling, home decoration is done is to choose solid bamboo wood fiber wall panel, thickness of 5mm, 8mm, 9mm and 13mm, home decoration is recommended to choose 8mm, 9mm, not too thin, will not occupy too much space, but also convenient for dark installation.
